Screen shots
User Manual
Add-On Library
Creating scenery
Creating vehicles
User survey

Add on planes - Others
Planes Gliders & Ultra lights Helicopters Library

Installing Ordinary add-ons

Installing Library add-ons

Download Page:
1  of 1

The Funcar Papilio Author: Pascal Dumat & Thomas Brueckelt

Pascal Dumat had the idea to make a vehicle vor VSF which can drive, fly and dive.
Thomas Bruckelt designed the Funcar Papilion in CAD and gave it to Pascal Dumat to transfer it into VSF.

Ilan Papini supported the project in combining the elements so that it works well as car, plane and submarine, Pascal added the pilot, animations and sounds, Thomas finished the flight model and designed the painting.

The name "Papilio" comes from "Cheilopogon papilio" which is a species of flying fishes.
Wing-folding is done with F / SHIFT+F, For driving ("car mode") move the wings to the inside (F).
Its also recommendend to move the trim in its minimum foreward position (e.g. -38) to avoid taking off.

For using the Papilio as a submarine unfold the wings (SHIFT+F) and fill the ballast tank with the yellow lever on the instrument panel, Move it downwards to flood the tank.
The ballast instrument left beside the lever shows you the condition.
"0" means no air inside the tank, so its filled with water and you can use it as a submarine.
For flying and driving the indicator must be on "100%", so the tank is empty.

For flying unfold the wings (SHIFT+F), Make sure that the trim is in neutral position (0) and there is no ballast (100% on the ballast indicator) on board.

You need no rudder to fly the funcar, Its flight characteristics are very gentle, so it will be easy for you to explore the VSF-sceneries.

This great add-on pack has been made by Pascal Dumat & Thomas Brueckelt

Download ( 3.5 MB )

The Ecureuil D-HQIX-Pack Author: Pascal Dumat & Thomas Brueckelt

After Thomas saw the Ecureuil from http://www.helixcopter.de/ in action close to his home he made this video and showed it to Pascal: https://www.youtube.com/watch?v=zmq5UE6NgN4

In the end of a rainy year there was a lack of plant nutrient in the forests of Germany. So chalk needed to be dropped on the forests to save the plants.

Pascal quickly prepared a very detailed Ecureuil-3D-model from http://tf3dm.com The project was born...

Thomas contacted the pilot of the real Ecureuil - Fred Burggraf – to make a very realistic flight model.
Pascal had the idea to add the wheel loader and the van with trailer to simulate the complete action.

Please read installation and use manual PDF file inside the zip file you download, the user manual explains in detail how to install loads, how to deploy and attach cargo, and how to maniplate the vehicles inside this package, do not try to use the vehicles without reading instructions first !

This great add-on pack has been made by Pascal Dumat & Thomas Brueckelt

Download ( 19.0 MB )

Crawler-transporter Author: Alexey Filatov

Crawler-transporter :  from wikipedia

The crawler-transporters, formally known as the Missile Crawler Transporter Facilities, 
are a pair of tracked vehicles used to transport spacecraft from NASA's Vehicle Assembly Building (VAB) along the Crawlerway to Launch Complex 39. They were originally used to transport the Saturn IB and Saturn V rockets during the Apollo, Skylab and Apollo�Soyuz programs. They were then used to transport Space Shuttles from 1981 to 2011.

The crawler-transporters carry vehicles on the Mobile Launcher Platform, and after each launch return to the pad to take the platform back to the VAB.

The two crawler-transporters were designed and built by Marion Power Shovel Company using components designed and built by Rockwell International at a cost of US$14 million each.

Upon its construction, the crawler-transporter became the largest self-powered land vehicle in the world. 

While other vehicles such as bucket-wheel excavators like Bagger 293, dragline excavators like Big Muskie and power shovels like The Captain are significantly larger, they are powered by external sources.

The two crawler-transporters were added to the National Register of Historic Places on January 21, 2000.

This detailed model has been made by Alexey Filatov


Download ( 2.7 MB )  

The JetMan Extreme Pack Author: Pascal Dumat & Thomas Brueckelt

The JetMan Extreme Pack includes three vehicles which together form a package for Micro Flight.

Download the zip file, and real the PDF manual inside for instructions, there you will find three vehicles.

JetMan Extreme, JetMan Glider, JetMan Helico, each of these is suitable for one the the flight modes of an actual JetWing. Use the Helico to lift up your JetMan, then use JetMan extreme to perform the flight with JetPack, and then use the JetMan Paraglider to perform the final part of your flight.

This great add-on pack has been made by Pascal Dumat & Thomas Brueckelt

Download ( 14.0 MB )

Scud-A SS-1b Tactical Ballistic Missile Author: Paolo Costa

Scud: From Wikipedia

Scud is a series of tactical ballistic missiles developed by the Soviet Union during the Cold War.
It was exported widely to other countries, in particular third world countries.
The term comes from the NATO reporting name SS-1 Scud which was attached to the missile by Western intelligence agencies.
The Russian names for the missile are the R-11 (the first version), R-17 and R-300 Elbrus (later developments).
The name Scud has been widely used to refer to these missiles and the wide variety of derivative variants developed in other countries based on the Soviet design.

These great vehicle and missile were been made by Paolo Costa

Download ( 7.0 MB )

New Cargos Update Author: Paolo Costa

The new cargos update includes several cargo types, mostly containers with two orientations, 0 and 90 degress.

The containers are quite heavy so they fit cargo ships only.

This creative and useful add-on was made by Paolo Costa

Download ( 2.0 MB )  

New Pilots Update Author: Paolo Costa

The new pilots update includes three pilots, the plane pilot and the car pilot have been scaled to fit ( 1.75 height ), the mil car pilot is a military paint scheme of the car pilot which was scaled to fit.

The original pilots were made by Marcel Aerni
This scaling and mil paint was made by Paolo Costa

Download ( 1.5 MB )  

FV510 Warrior Armoured Personnel Carrier Author: Paolo Costa

FV510: From Wikipedia

The Warrior tracked vehicle family is a series of British armoured vehicles, originally developed to replace the older FV430 series of armoured vehicles.

The Warrior started life as the MCV-80 project that was first broached in the 1970s, GKN Sankey/Defence winning the production contract in 1980. GKN Defence was subsequently purchased by BAE Systems (via Alvis plc).

A total of 789 FV510 and variants were manufactured for the British Army, and 254 of a modified version (Desert Warrior) were produced for the Kuwaiti Army.

This fantastic model has been made by Paolo Costa

Download ( 3.5 MB )  US Army paint scheme

HEMTT Heavy Expanded Mobility Tactical Truck Author: Paolo Costa

HEMTT: From Wikipedia

The Heavy Expanded Mobility Tactical Truck (HEMTT) series is a range of eight-wheel drive diesel-powered off-road capable trucks, used by the US military. Formally described as "Truck, Cargo: 10-Ton, 8x8", it has been nicknamed the "Dragon Wagon". HEMTT trucks first went into service with the U.S. Army in 1982, as a replacement for the M520 Goer.[3]

A 10x10 variant of the HEMTT truck is used as prime mover in the Palletized load system (PLS). The vehicle is produced by the Oshkosh Corporation. In the civilian realm the truck's chassis is also used in the Oshkosh Striker as an airport crash tender.

The United States Marine Corps uses a similar vehicle, the Logistics Vehicle System (LVS), also manufactured by Oshkosh. An LVS differs in that it is actually an articulated vehicle, similar to a semi-trailer truck, using a modular system of a Front Power Unit attached to a Rear Body Unit, whereas HEMTTs are non-articulated, single unit vehicles.

This fantastic model has been made by Paolo Costa

Download ( 4.0 MB )

BTR4 Armoured Personnel Carrier Author: Paolo Costa

BTR4: From Wikipedia

The BTR-4 Armoured Transporter is a 8x8 wheeled armoured personnel carrier (APC) designed in Ukraine by the Kharkiv Morozov Machine Building Design Bureau (SOE KMDB) as a private venture.

The prototype, which was designed as a private venture, was unveiled at the Aviasvit 2006 exhibition held in Ukraine in June 2006.

This fantastic model has been made by Paolo Costa

Download ( 2.0 MB )

VW Golf II Author: Paolo Costa

VW Golf II: From Wikipedia

The Volkswagen Golf Mk2 succeeded the Mk1 as Volkswagen's volume seller from 1983 and remained in (German) production until late 1992.

In comparison to its predecessor, its wheelbase grew slightly (+ 75 mm (3.0 in)), as did exterior dimensions (length + 180 mm (7.1 in), width + 55 mm (2.2 in), height + 5 mm (0.2 in)).

Weight was up accordingly by about 120 kg (264.6 lb).
Exterior design, developed in- house by VW design director Schäfer, kept the general lines of its Giugiaro-designed predecessor, but was slightly more rounded.
All told, about 6.3 million[2] second-generation Golfs were built.

This fantastic model has been made by Paolo Costa

Download ( 3.5 MB )

M1-A1-Abrams Tank Author: Paolo Costa

M1-A1-Abrams: From Wikipedia

The M1 Abrams is a third-generation main battle tank produced in the United States.

It is named after General Creighton Abrams, former Army Chief of Staff and Commander of US military forces in Vietnam from 1968 to 1972.
Highly mobile, designed for modern armored ground warfare,[9] the M1 is well armed and heavily armored.

Notable features include the use of a powerful gas turbine engine (multifuel capable, usually fueled with JP8 jet fuel), the adoption of sophisticated composite armor, and separate ammunition storage in a blow-out compartment for crew safety.

Weighing nearly 68 short tons (almost 62 metric tons), it is one of the heaviest main battle tanks in service.
The M1 Abrams entered U.S. service in 1980, replacing the M60 tank.
It served for over a decade alongside the improved M60A3, which had entered service in 1978.

The M1 remains the principal main battle tank of the United States Army and Marine Corps, and the armies of Egypt, Kuwait, Saudi Arabia, Australia, and Iraq.

This fantastic model has been made by Paolo Costa

Download ( 5.0 MB )  Note: This model  has moving tracks

Ural-375D - Russian Truck Author: Paolo Costa

Ural-375D: From Wikipedia

The Ural-375D is a general purpose 4.5 ton 6x6 truck, produced at the Ural Automotive Plant in the Russian SFSR since 1961.

The ZIL-157 was the standard Soviet truck until it was replaced by the Ural-375D, which became the standard Soviet truck in 1979.

The Ural-375D was soon replaced by the Ural-4320.

The Soviets found the trucks an ideal platform for the BM-21 Grad rocket launcher, Other modes for the Ural-375D included troop carrier, supply carrier, etc.

This fantastic model has been made by Paolo Costa

Download ( 2.0 MB )  

Guida - Brasilian Samba Dancer Author: Paolo Costa

Samba: From Wikipedia

Samba is a lively, rhythmical dance of Brazilian origin in 2/4 time danced under the Samba music.

However, there are three steps to every bar, making the Samba feel like a 3/4 timed dance. Its origins include the Maxixe The Samba music rhythm has been danced in Brazil since its inception in the late 19th century.

There is actually a set of dances, rather than a single dance, that define the Samba dancing scene in Brazil.

Thus, no one dance can be claimed with certainty as the "original" Samba style.

This fantastic model has been made by Paolo Costa

Download ( 7.5 MB )  

Hot Air Balloon Author: Richard SantaColoma
Hot Air Balloon: From Wikipedia

The hot air balloon is the oldest successful human-carrying flight technology.
It is part of a class of aircraft known as balloon aircraft.
On November 21, 1783, in Annonay, France, the first untethered[1] manned flight was performed by Jean-François Pilâtre de Rozier and François Laurent d'Arlandes in a hot air balloon created on December 14, 1782 by the Montgolfier brothers.
Hot air balloons that can be propelled through the air rather than just being pushed along by the wind are known as airships or, more specifically, thermal airships.

This model has been made by Richard SantaColoma

Download ( 0.3 MB )  

TinTin Moon Rocket ( Kuifje Rocket ) Author: Rob Cassteele
Destination Moon (Tintin) : From Wikipedia

Destination Moon is the sixteenth of The Adventures of Tintin, a series of classic comic-strip albums, written and illustrated by Belgian writer and illustrator Hergé, featuring young reporter Tintin as a hero.
Destination Moon is the first part of one of the four multi-book stories in the Tintin series, the other part being Explorers on the Moon (On a marché sur la Lune).
It is one of two latter-day Tintin albums (the other being The Castafiore Emerald) that is not structured as a straightforward adventure story[citation needed]; instead, it is an episodic sequence of events surrounding the development of a moon rocket.
There is, however, a subplot involving espionage to hold the episodes together.

These models have been made by Rob Cassteele

Download ( 0.5 MB )  

The Train and scenery Pack Author: Jonatan Grönoset

The train and scenery pack includes two vehicles and one small scenery, the vehicles are Train Engine, Train Car, and can be attached using the fixed length attachment as a train.

The small scenery of California is the morro bay area, and includes some tracks and other objects, and can be used to demostrate the train functionality and other things you wish to experiment with.

These models have been made by Jonatan Grönoset

Download ( 3.5 MB )  

Olifant Tank Author: Ilan Papini

The Olifant is a South African modification of the British Centurion tank.
The main modification is the replacement of the old 20 pounder with a 105mm
cannon with a modern firing mechanism.

This model is based upon the work of Martin Schemmer.

Download ( 0.65 MB )  

U-Boat Author: Dariusz Gurtowski
The beautiful U-Boat is a WWII german U-Boat submarine, beutiful and detailed, meticulousely created by Dariusz Gurtowski
Download ( 0.75 MB )  

IMAX-6 Author: Richard SantaColoma
The beautiful IMAX-6 is an amazing passenger sub with unparraleled view, beutifully created with all internal detailes, documentation and true spirit of adventure by Richard SantaColoma
Download ( 0.7 MB )  

Sea Shadow Author: Chris Johnston
Built by Lockheed in total secrecy inside the famous Hughes Mining Barge, the Sea Shadow is the nautical equivalent of the F-117 "stealth fighter".
The Sea Shadow is a SWATH (Small Waterplane Area Twin Hull) vessel with all above-water surface sloped radically inward.
She is 160 feet long, 70 feet in beam, 14 feet in draft, displaces 560 tons and her diesel-electric propulsion gives her a top speed of 13 knots.
She is invisible to shipboard radar, even at close range.

This submarine was beautifully created by Chris Johnston

Download ( 0.5 MB )  

DeepCore 2 Author: Chris Johnston
The Flatbed is the workhorse of the 'DeepCore 2' submersible drilling rig, as featured in James Cameron's epic film, "The Abyss"!

This submarine was beautifully created in full detail by Chris Johnston

Download ( 0.5 MB )  

Download Page:
1  of 1

Copyright Ilan Papini 1999 - 2017 (c)
All Right Reserved